[Feb 14, 2023] Get to the Top with NS0-516 Practice Exam Questions
Use Real NS0-516 Dumps Free Sample Questions and Practice Test Engine
NEW QUESTION 28
What are two methods for setting the host protocol configuration on the E2800 controller with a 4-port 16Gbps FC or 10Gbps iSCSI SFP+ host interface card (HIC)? (Choose two)
- A. Change the feature pack in the SANtricity System Manager.
- B. Change the QSFP type in the HIC
- C. Set at the factory based on the order.
- D. Set in the hardware tab using SANtricity System Manager
Answer: A,B
NEW QUESTION 29
You need to run a command from the SANtricity System Manager GUI to mark drives as native by using the CLI tool on an E-Series system that is running System Manager 11.60 or higher.
In this scenario, where would you locate this tool?
- A. Support -> Support Center -> Diagnostics
- B. Help -> CLI Command Reference
- C. Settings -> System -> Addons
- D. Modify Existing Storage
Answer: C
NEW QUESTION 30
Which two steps are required to enable multifactor authentication on an E-Series system? (Choose two)
- A. Configure In-Band Management
- B. Configure LDAP
- C. Map roles
- D. Test SSO login
Answer: B,C
NEW QUESTION 31
Which component of an E-Series storage system should always be upgraded first? (Choose the best answer.)
- A. ESM firmware
- B. Controller firmware
- C. Controller NVSRAM
- D. SANtricity management client
Answer: B
NEW QUESTION 32
What is represented by the Headroom graph on the SANtricity System Manager performance tab?
- A. the remaining performance capability of the physical objects in the storage system
- B. the percentage of I/O associated with the backend disk drives
- C. the resources that are being consumed by a defined workload
- D. the percentage of CPU processing capacity that is being used by the operations on the system
Answer: A
NEW QUESTION 33
The interval for an asynchronous mirror group should usually be equal to ______________. (Choose the best answer.)
- A. the corresponding application's RPO
- B. half the corresponding application's RPO
- C. the amount of time required to copy the size of the mirror repository to the remote site
- D. half the corresponding application's RTO
- E. the corresponding application's RTO
Answer: C
NEW QUESTION 34
Which statement most accurately describes the benefits of ALUA?
- A. It sets the storage system to an active-active LUN access model.
- B. It ensures that controller ownership for a volume will not change.
- C. It causes an immediate ownership change of a volume whenever I/O uses an alternate path to the storage system.
- D. It eliminates the need for zoning of the SAN fabric in a duplex controller configuration.
Answer: A
NEW QUESTION 35
What does the CHAP secret accomplish for an E-Series system?
- A. SAS authentication
- B. iSCSI authentication
- C. FC authentication
- D. Ethernet management authentication
Answer: B
NEW QUESTION 36
Which three documents should be provided to the customer after the E-Series installation is complete?
(Choose three.)
- A. a document showing how much space is available for system expansion
- B. a document showing available power on the UPS with no equipment connected
- C. a document showing the cabinet layout with cabling information and IP addresses being used
- D. a document showing user IDs and passwords for all deployed devices
- E. a document with IMT pages that show the supported host configuration and fabric switches in the solution
Answer: B,C,D
NEW QUESTION 37
What is the minimum number of drives needed to create a Dynamic Disk Pool?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 38
Click the Exhibit button.
Referring to the exhibit, which three steps would you take to solve the problem shown in the event log?
(Choose three.)
- A. Swap out the FC cable
- B. Swap out the SFP in the controller port
- C. Swap out the HBA on the FC switch
- D. Reinitialize the FC switch
- E. Move the connection to another controller port
Answer: A,B,C
NEW QUESTION 39
What does a lit blue SAA LED indicate?
- A. The component is functioning normally.
- B. The component has failed.
- C. It is safe to remove the component.
- D. Power is turned on to the component.
Answer: C
NEW QUESTION 40
Storage system volumes can be built upon what two types of logical structures? (Choose the best answer.)
- A. Volume Groups and Virtual Disks
- B. Volume Pools and Virtual Disks
- C. Virtual Disks and Disk Pools
- D. Volume Pools and Volume Groups
- E. Volume Groups and Disk Pools
Answer: E
NEW QUESTION 41
A customer is running several EF570 systems and uses the ability of the EF-Series systems to run two host protocols at the same time.
You are installing a new EF570 that uses the NVMe protocol for a high performance computing application. The controller on-board ports will not connect, but the HIC ports are working fine.
In this scenario, what is the problem?
- A. The switch ports are shut-down
- B. There is a cable fault preventing the on-board ports from connecting
- C. The on-board host ports are disabled
- D. The on-board ports have the wrong SFPs for the desired network protocol
Answer: D
NEW QUESTION 42
Which scenario is allowed for mirroring between sites?
- A. Data Assurance disabled on the primary volume and enabled on the secondary volume
- B. FDE disabled on the primary volume and enabled on the secondary volume
- C. FDE enabled on the primary volume and disabled on the secondary volume
- D. Data Assurance enabled on the primary volume and enabled on the secondary volume
Answer: D
NEW QUESTION 43
What measurement refers to how much data can be handled in a given time period? (Choose the best answer.)
- A. Parity
- B. I/O alignment
- C. Throughput
- D. Read modify write
- E. IOPS
Answer: C
NEW QUESTION 44
Which alerting method would be configured using the SANtricity System Manager setup wizard?
- A. Web Services Proxy
- B. Email
- C. Syslog
- D. SNMP
Answer: D
NEW QUESTION 45
......
NetApp NS0-516 Exam Topics:
| Section | Objectives |
|---|---|
| Storage Configuration | -Describe how to setup alerting and notification for the E-Series system. -Describe how to create and administer Volume Groups or DDP and associated volumes. -Describe physical and logical storage requirements. -Describe the setup of CHAP for an iSCSI environment. -Describe when to use DDP or Volume Groups. |
| Protection | -Describe how Data Assurance with media scan protects your data. - Describe SANtricity data protection features. |
| Host Side | -Describe the different host connection options for E-Series systems. -Describe how to configure hosts for multipathing. |
| Management | -Describe the administrative tasks for managing E-Series systems with SANtricity System Manager. -Describe the management security features in SANtricity System Manager and SANtricity Unified Manager. -Describe when and how to configure and use SANtricity Unified Manager. |
| Hardware | -Describe the hardware components in an E-Series storage system. -Describe Fibre Channel, Ethernet, Infiniband and SAS cabling. -Describe the appropriate tasks for adding additional storage to an E-Series system. -Describe drive encryption features. |
| Troubleshooting | -Demonstrate the steps for troubleshooting an E-Series system. -Demonstrate how to analyze multipathing issues between a host and an E-Series system. |
| Toolbox | -Describe the tools required to design and implement an E-Series solution. |
| SAN | -Describe the end-to-end network configuration for Fibre Channel and Ethernet. |
NetApp NS0-516 Exam Certification Details:
| Exam Price | $150 USD |
| Exam Registration | PEARSON VUE |
| Recommended Training | E-Series Fundamentals (WBT) Configuring and Monitoring NetApp E-Series and EF-Series Storage Systems (ILT) |
| Sample Questions | NetApp NS0-516 Sample Questions |
| Exam Code | NS0-516 NCIE SAN Specialist E-Series |
Pass Network Appliance NS0-516 exam - questions - convert Tets Engine to PDF: https://www.trainingdumps.com/NS0-516_exam-valid-dumps.html
2023 Realistic Verified Free Network Appliance NS0-516 Exam Questions: https://drive.google.com/open?id=1kpZkTpLwcG9F2nRph5J2RjkYNBb8IQ_j
