[Aug 25, 2021] Get Free Updates Up to 365 days On Developing 350-501 Braindumps [Q124-Q144]

Share

[Aug 25, 2021] Get Free Updates Up to 365 days On Developing 350-501 Braindumps

Best Quality Cisco 350-501 Exam Questions

NEW QUESTION 124
Refer to the exhibit.

A network engineer with an employee id: 3812:12:993 has started to configure router R1 for IS-IS as shown.
Which additional configuration must be applied to configure the IS-IS instance to advertise only network prefixes associated to passive interfaces?

  • A. Option A
  • B. Option D
  • C. Option B
  • D. Option C

Answer: A

 

NEW QUESTION 125
Which configuration modifies Local Packet Transport Services hardware policies?
A)

B)

C)

D)

  • A. Option A
  • B. Option D
  • C. Option B
  • D. Option C

Answer: A

 

NEW QUESTION 126
Refer to the exhibit:

Which information is provided for traceback analysis when this configuration is applied?

  • A. packet size distribution
  • B. IP sub flow cache
  • C. BGP version
  • D. source interface

Answer: C

 

NEW QUESTION 127
Drag and drop the OSs from the left onto the correct descnpt.ons on the right.

Answer:

Explanation:

 

NEW QUESTION 128
Drag and drop the multicast concepts from the left onto the correct descriptions on the right.

Answer:

Explanation:

 

NEW QUESTION 129
Refer to the exhibit:

Export statistics received do not include the BGP next hop.
Which statement about the NetFlow export statistics is true?

  • A. To include the BGP next hop in the export statistics, those keywords must be included with the version
    9 entry.
  • B. The origin AS and the peer-as will be included in the export statistics.
  • C. Loopback 0 must be participating in BGP for it to be included in the export statistics.
  • D. Only the origin AS of the source router will be included in the export statistics.

Answer: A

 

NEW QUESTION 130
Which feature will an operator use while implementing MPLS TE on customer's network, to prevent an LSP from using any overseas inks?

  • A. explicit path
  • B. SLRG
  • C. affinity
  • D. bandwidth

Answer: A

 

NEW QUESTION 131
Refer to the exhibit:

Which statement about the status of the neighbor relationship between R1 and R2 is true?

  • A. The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different area
  • B. The neighbor relationship is down because the two routers are configured with different area types
  • C. The neighbor relationship is down because the two routers are in the same subnet.
  • D. The neighbor relationship is up because R2 is level 1 and level 2 router.

Answer: A

 

NEW QUESTION 132
Refer to the exhibit:

Which statement describes the effect of this configuration?

  • A. It creates an ACL named WEB that filters HTTP traffic.
  • B. It modifies the default policy map to allow all HTTP traffic through the router
  • C. It matches HTTP traffic for use in a policy map
  • D. It applies a service policy to all interfaces remarking HTTP traffic

Answer: C

 

NEW QUESTION 133

Refer to the exhibit. Which purpose of implementing NSF with this configuration is true?

  • A. The router uses NSF to load balance traffic between two links, with the primary link alternating every 90 seconds.
  • B. The router uses NSF to load balance traffic on a routed EtherChannel.
  • C. The router uses NSF to reduce neighbor-relationship downtime during RP switchover.
  • D. The router uses NSF to handle RP switchover while allowing neighbor relationships to remain up.

Answer: D

Explanation:
Section: Networking

 

NEW QUESTION 134
An engineer is developing a configuration script to enable dial-out telemetry streams using gRPC on several new devices. TLS must be disabled on the devices. Which configuration must the engineer apply on the network?
A)

B)

C)

D)

  • A. Option A
  • B. Option D
  • C. Option B
  • D. Option C

Answer: A

 

NEW QUESTION 135
Refer to the exhibit:

Which effect of this configuration is true?

  • A. It enables MPLS on the interface
  • B. It enables tagging for VLAN 12 on the interface
  • C. It enables AToM on interface gigabitethemet1/0
  • D. it creates a pseudowire class named Cisco

Answer: C

 

NEW QUESTION 136
Refer to the exhibit.

Export statistics received do not include the BGP next hop. What is the effect of this configuration?

  • A. Only the origin AS of the source router will be Included in the export statistics.
  • B. To include the BGP next hop in the export statistics, those keywords must be included with the version
    9 entry.
  • C. The origin AS and the peer-as will be included In the export statistics.
  • D. Loopback 0 must be participating in BGP for it to be Included in the export statistics.

Answer: A

 

NEW QUESTION 137
Refer to the exhibit:

An engineer wants to authenticate the OSPF neighbor between PEA and PE-B using MD5.
Which command on PE-B successfully completes the configuration?
A)

B)

C)

D)

  • A. Option A
  • B. Option D
  • C. Option B
  • D. Option C

Answer: A

 

NEW QUESTION 138
Refer to the exhibit.
A network engineer is implementing a standard customer route-policy on ASBR1 with these requirements:
* It must accept only customer-assigned prefixes
* It must preserve customer advertised BGP communities
* It must set the local-preference to 110 for all prefixes
* It must attach the ORIGINATION-PE and LOCAL-CITY communities to all accepted prefixes.
Which route policy must the engineer implement on ASBR1 to satisfy the requirements?

  • A. Option A
  • B. Option D
  • C. Option B
  • D. Option C

Answer: A

 

NEW QUESTION 139
Drag and drop the methods of Cisco MPLS TE tunnel traffic assignment from the left onto their characteristics on the right.

Answer:

Explanation:

 

NEW QUESTION 140
Which protocol does a Cisco MPLS TE tunnel use to maintain paths within the core?

  • A. VTP
  • B. RSVP
  • C. RPF
  • D. STP

Answer: B

 

NEW QUESTION 141
Which regular expression query modifier function indicates the start of a string?

  • A. $
  • B. +
  • C. ^
  • D. [^]

Answer: C

 

NEW QUESTION 142
Drag and drop the LDP features from the left onto the correct usages on the right.

Answer:

Explanation:

 

NEW QUESTION 143
Which three OSPF parameters must match before two devices can establish an OSPF adjacency? (Choose three.)

  • A. hello timer setting
  • B. process ID
  • C. subnet mask
  • D. area number
  • E. interface cost
  • F. IP address

Answer: A,C,D

Explanation:
Section: Networking

 

NEW QUESTION 144
......

Cisco Exam Practice Test To Gain Brilliante Result: https://www.trainingdumps.com/350-501_exam-valid-dumps.html

Tested Material Used To 350-501: https://drive.google.com/open?id=1O136dBlOAhWuApxoeCZb0JhIodMsEZfD