350-501 Practice Exam Tests Latest Updated on Nov-2023
Pass 350-501 Exam in First Attempt Guaranteed Dumps!
Cisco 350-501 exam tests candidates on their understanding of advanced routing protocols, infrastructure services, virtualization, automation, and security. Candidates are expected to demonstrate their knowledge of the latest industry trends and best practices for service provider networks. They should also be able to troubleshoot complex network issues and optimize network performance.
Cisco 350-501 exam is intended for IT professionals who are interested in pursuing a career in service provider networking. 350-501 exam is particularly relevant for network engineers, network architects, and other IT professionals who are responsible for designing, implementing, and operating service provider networks. 350-501 exam is also suitable for those who are interested in gaining a deeper understanding of service provider networking and want to enhance their IT skills.
NEW QUESTION # 89
Drag and drop the OSPF area types from the left onto the correct statements on the right
Answer:
Explanation:
NEW QUESTION # 90
Drag and drop the OSPF and IS-IS Cisco MPLS TE extensions from the left to their functional descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 91
Refer to the exhibit. An engineer is reviewing the BGP configuration. Which router must be advertised to
10.10.10.1?
Refer to the exhibit. An engineer is reviewing the BGP configuration.
Which routes must be advertised to 10.10.10.1
- A. Local routes are denied, and routes from other ASNs are permitted.
- B. Local routes are permitted, and routes from other ASNs are denied.
- C. All routes whether local or from other ASNs are permitted.
- D. All routes whether local or from other ASNs are denied.
Answer: C
NEW QUESTION # 92
An network engineer is deploying VRF on ASBR router R1. The interface must have connectivity over an MPLS VPN inter-AS Option AB network.
Which configuration must the engineer apply on the router to accomplish this task?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 93
On Cisco IOS XR devices, which action improves failure reaction for Link OAM when Path Isolation with Ethernet Failure Detection is used?
- A. Change the interface status to error-disable operating at Layer 1
- B. Triggers port suspend when heartbeat is lost
- C. Bring down the line protocol interface state when a problem is detected
- D. Close the gap when UDLD detects that Ethernet ports are miswired
Answer: C
NEW QUESTION # 94
Refer to the exhibit:
Export statistics received do not include the BGP next hop.
Which statement about the NetFlow export statistics is true?
- A. Only the origin AS of the source router will be included in the export statistics.
- B. The origin AS and the peer-as will be included in the export statistics.
- C. To include the BGP next hop in the export statistics, those keywords must be included with the version
9 entry. - D. Loopback 0 must be participating in BGP for it to be included in the export statistics.
Answer: C
NEW QUESTION # 95
Refer to the exhibit.
What type of configuration is it?
- A. It is configuration that requires an explicit Cisco MPLS TE path to be configured for the tunnel to run.
- B. It is configuration that requires a dynamic Cisco MPLS TE path to be configured for the tunnel to run.
- C. It is configuration for the head-end router of a Cisco MPLS TE tunnel with segment routing.
- D. It is configuration that requires OSPF to also be running to have optimized Cisco MPLS TE tunnels.
Answer: C
NEW QUESTION # 96
An engineer is setting up overlapping VPNs to allow VRF ABC and XYZ to communicate with VRF CENTRAL but wants to make sure that VRF ABC and XYZ cannot communicate. Which configuration accomplishes these objectives?
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: D
NEW QUESTION # 97
Refer to the exhibit.
A network operator has two IPv4 and IPv6 dual-stacked network on each side of the IPv4 core network. The operator must be able to provide connectivity between them while using specific assigned IPv6 space provided from the company IP administrator team. Which technology should the network operator use to accomplish this goal?
- A. 6rd
- B. NAT46
- C. DS-Lite
- D. NAT44
Answer: B
NEW QUESTION # 98
Which additional configuration is required for NetFlow to provide traceback information?
- A. Cisco Express Forwarding must be configured for traffic that is egressing from the router to be properly reported.
- B. LLDP must be configured or the device will be unable to locate a NetFlow analyzer.
- C. A classification ACL must be configured to identify which type of traffic will be analyzed.
- D. The BGP routing process must be started for any ingress or egress data to be reported when using NetFlow. Version 5.
Answer: C
Explanation:
NEW QUESTION # 99
Refer to the exhibit.
To protect in-band management access to CPE-R7, an engineer wants to allow only SSH management and provisioning traffic from management network 192.168.0.0/16. Which infrastructure ACL change must be applied to router PE-R9 to complete this task?
A)
B)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: D
NEW QUESTION # 100 
Refer to the exhibit. Which statement describes the effect of this configuration?
- A. It matches HTTP traffic for use in a policy map.
- B. It creates an ACL named WEB that filters HTTP traffic.
- C. It applies a service policy to all interfaces remarking HTTP traffic.
- D. It modifies the default policy map to allow all HTTP traffic through the router.
Answer: A
Explanation:
Section: Services
Explanation/Reference:
NEW QUESTION # 101
Refer to the exhibit.
R101 is peering with R102 and R103, and R201 is peering with R202 and R203 using iBGP Labeled Unicast address families. The OSPF area 0 border routers are in a full iBGP Labeled Unicast mesh, and VPNv4 routes are exchanged directly between PE routers R101 and R201 through iBGP Which address family-level configuration must be applied on ABR R102 on ABR R102 to support a Unified MPLS routing architecture with partitioned IGP domains?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: D
NEW QUESTION # 102
Refer to the exhibit A user is performing QoS marking on internet traffic and sending it with IPv4 and IPv6 headers on the provider edge device PE1. IPv4 traffic is classified with DSCP 4 and IPv6 traffic is classified with DSCP 6. Which action must the engineer take to begin implementing a QoS configuration on PE1 for the IPv6 traffic?
- A. Create access list IPv6-filter and remove DSCP value 4 and 6 in class maps CM-10 and CM-20.
- B. Create an access list that includes any IPv6 traffic and apply it to CM-20.
- C. Create access list IPv6-match and configure match ip dscp 4 and match ip dscp 6 in class maps CM-10 and CM-20.
- D. Configure match ip dscp 4 in class map CM-10 and match ip dscp 6 in class map CM-20.
Answer: B
NEW QUESTION # 103
Drag and drop the functionalities from the left onto the correct target fields on the right.
Answer:
Explanation:
NEW QUESTION # 104
......
CCNP Service Provider Free Certification Exam Material from TrainingDumps with 373 Questions: https://www.trainingdumps.com/350-501_exam-valid-dumps.html
350-501 Dumps Full Questions - Exam Study Guide: https://drive.google.com/open?id=11g_5dBwGRfoJSDhXe7-1MPIGeTcKNksP
