Certification Training for NS0-162 Exam Dumps Test Engine [2021]
Sep 09, 2021 Step by Step Guide to Prepare for NS0-162 Exam
NEW QUESTION 29
You want to scale out storage performance for read-Intensive data across multiple locations. In this scenario, which NetApp feature accomplishes this task?
- A. FlexCache
- B. FlexVol
- C. Flash Pool
- D. FlexClone
Answer: A
NEW QUESTION 30
Which two protocols does ALUA support on an ONTAP cluster? (Choose two.)
- A. NFS
- B. NVMe
- C. FCP
- D. iSCSI
Answer: C,D
NEW QUESTION 31
After attempting to perform an ONTAP upgrade. It falls during the pre-check. In this scenario, what would cause this problem?
- A. offline data LIF
- B. Idle SnapMirrors
- C. offline volume
- D. encrypted volumes
Answer: C
NEW QUESTION 32
Exhibit.
You have an SVM-DR relationship as shown in the exhibit. You are given a new requirement to use SnapMirror Synchronous (SMS) for the data volumes In NFS-SVM-01.
In this scenario, which solution Is supported to enable SMS in ONTAP 9.8 software?
- A. Set up NetApp Cloud Sync with a cloud broker in AWS to replicate to a new destination.
- B. Modify the existing SVM-DR policy to use sync mode.
- C. Set up new SM-S relationships from the FAS2720 to a new destination.
- D. Set up new SM-S relationships from the AFF A220 to a new destination.
Answer: D
NEW QUESTION 33
Exhibit.
You have a NetApp AFF A400 HA pair with Fabric Pool enabled on all data using the snapshot-only policy.
Users are reporting slow restores when they recover files with the Windows Previous Versions tab.
Referring to the exhibit, what is the highest latency seen on restore?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 34
All SMB users are reporting that their network share performance Is slow on a new NetApp FAS500f HA pair. You determine that the users have converged network adapters (CNAs) with flow control enabled and no option to disable.
In this scenario, which two flow control settings are recommended on the NetApp ONTAP physical ports? (Choose two.)
- A. Enable flow control end-to-end on data network ports.
- B. Disable flow control end-to-end on data network ports.
- C. Disable flow control end-to-end on cluster network ports.
- D. Enable flow control end-to-end on cluster network ports.
Answer: B,C
NEW QUESTION 35
Your company requires WORM archiving of data on their ONTAP cluster. The data must not be able to be deleted even by an administrator. Which ONTAP feature fulfills this requirement?
- A. SnapMlrror software
- B. SnapVault software
- C. SnapLock Compliance
- D. SnapLock Enterprise
Answer: C
NEW QUESTION 36
Which two types of capacity tiers are supported with FabrlcPool aggregates In ONTAP 9.8? (Choose two.)
- A. S3 Object Store
- B. SWIFT Object Store
- C. NFS Export
- D. StorageGRID Object Storage
Answer: A,D
NEW QUESTION 37
Which two storage efficiency features are enabled by default on AFF systems? (Choose two.)
- A. aggregate-level compression
- B. volume-level Inline deduplication
- C. LUN-level compression
- D. aggregate-level inline deduplication
Answer: B,D
NEW QUESTION 38
Click the Exhibit button.
Your manager asks you to create a new FlexVol on an aggregate called AGGR_2. When you click "Create new FlexVol," you are unable to select AGGR_ 2 to create the new volume.
Referring to the exhibit, which two SVM settings solve this problem? (Choose two.)
- A. Use the volume move option and reallocate the SVMs root volume to AGGR_2.
- B. Change the aggregate security style of AGGR_2 to UNIX.
- C. In the resource allocation tab, select the "Delegate volume creation" option and select AGGR_2.
- D. In the resource allocation tab, select the "Do not delegate volume creation" option.
Answer: C,D
NEW QUESTION 39
You are asked to delete an SVM that was used for CIFS.
Which two steps must be completed prior to completing this task? (Choose two.)
- A. Delete all data volumes in the SVM.
- B. Delete the CIFS license.
- C. Stop the SVM.
- D. Delete all LIFs from all SVMs.
Answer: A,C
NEW QUESTION 40
Your company has purchased two NetApp AFF A400 HA pairs. During deployment, how many root aggregates are created?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 41
After creating an SVM In an ONTAP cluster, you are asked to delegate administration of the newly created SVM to an SVM administrator. In this scenario, which two tasks must you complete? (Choose two.)
- A. Create a LIF for SVM management.
- B. Set a password for the vsadmin user account.
- C. Create the vsadmin user account in the new SVM.
- D. Configure role-based access control (RBAC) for the vsadmin user account.
Answer: A,B
NEW QUESTION 42
You attempt to create an SVM for CIFS access only.
In this scenario, which three actions must be performed to Join the existing Active Directory? (Choose three.)
- A. Create export policies.
- B. Create DNS entries.
- C. Create NTP entries.
- D. Create a data LIF.
- E. Create a cluster LIF.
Answer: A,B,D
NEW QUESTION 43
Exhibit.
Referring to the exhibit, what would cause a customer to have an Issue with SVM eplc_fcp when mapping a namespace to a host?
- A. NVMe is not licensed on the cluster.
- B. NVMe Is not configured for the SVM.
- C. FC has not been licensed on the cluster.
- D. FC switch zoning has not been done correctly.
Answer: B
NEW QUESTION 44
You are creating a NAS volume for vSphere.
In this scenario, which two elements must be present when you perform this task? (Choose two.)
- A. NFS license
- B. iSCSI license
- C. CIFS license
- D. SVM
Answer: A,D
NEW QUESTION 45
After deploying an ONTAP 9.8 cluster, you want to disable the unused Ethernet ports. In this scenario, which two methods would accomplish this task? (Choose two.)
- A. Use Active IQ Unified Manager.
- B. Use ONTAP System Manager.
- C. Use the command line interface.
- D. Use Active IQ Config Advisor.
Answer: B,D
NEW QUESTION 46
You are the administrator of an ONTAP 9.8 cluster. Your company wants to know how many files are In the NAS volumes of the cluster and how old these files are.
Which two tools fulfill this requirement? (Choose two.)
- A. ONTAP System Manager
- B. Active IQ Config Advisor
- C. ONTAP CLI
- D. Active IQ Unified Manager
Answer: A,C
NEW QUESTION 47
You have a FlexClone parent volume with several child volumes.
In this scenario, which statement is true when you move the FlexClone parent volume to another aggregate?
- A. All FlexClone child volumes are split and are no longer FlexClone volumes.
- B. All FlexClone child volumes are also moved.
- C. The volume move operation fails.
- D. A temporary FlexClone parent remains on the original aggregate.
Answer: D
NEW QUESTION 48
Exhibit.
A user cannot save a file on an ONTAP SMB share.
Referring to the exhibit, which action allows the user to save the file?
- A. Synchronize the ONTAP Cluster time to the Active Directory time.
- B. Let the user save the file to a writeable location.
- C. Allow the file type *, rtf In the CIFS Server fpolicy.
- D. Set the user permission for the share to write.
Answer: B
NEW QUESTION 49
What are three supported fabric-attached Metro Cluster solutions? (Choose three.)
- A. a two-node bridge-attached solution
- B. a two-node solution
- C. a four-node solution
- D. a two-node direct-attached solution
- E. an eight-node solution
Answer: B,C,E
NEW QUESTION 50
Click the Exhibit button.
Referring to the exhibit, whi ch LIF role is required to copy to cloud with this NetApp Data Availability Services (NDAS) solu tion?
- A. cluster
- B. data
- C. inter cluster
- D. node management
Answer: C
NEW QUESTION 51
......
Ultimate Guide to Prepare NS0-162 Certification Exam for NetApp NCDA ONTAP: https://www.trainingdumps.com/NS0-162_exam-valid-dumps.html
NetApp NCDA ONTAP NS0-162 Real Exam Questions and Answers FREE Updated: https://drive.google.com/open?id=1H4KASREMSn4WYg7l_5BW6ko8gX6ro-or
