New 2023 Realistic Free Adobe AD0-E718 Exam Dump Questions & Answer [Q28-Q52]

New 2023 Realistic Free Adobe AD0-E718 Exam Dump Questions and Answer

AD0-E718 Practice Test Engine: Try These 50 Exam Questions

NEW QUESTION # 28
An Adobe Commerce Architect runs the PHP Mess Detector from the command-line interface using the coding standard provided with Adobe Commerce. The following output appears:

The Architect looks at the class and notices that the constructor has 15 parameters. Five of these parameters are scalars configuring the behavior of Kyservice.
How should the Architect fix the code so that it complies with the coding standard rule?

• A. Modify the code of Myservice so that the number of different classes and interfaces referenced anywhere inside the class is less than 13
• B. Modify the code of Myservice so the number of different classes, interfaces, and scalar types used as parameters in the constructor and other methods is less than 13
• C. Introduce a new class accepting those five scalars and use it in the constructor and the remaining logic of Myservice

Answer: C

Explanation:
The best way to fix the code so that it complies with the coding standard rule is to introduce a new class accepting those five scalars and use it in the constructor and the remaining logic of Myservice. This will reduce the number of different classes, interfaces, and scalar types used as parameters in the constructor and other methods to less than 13, which is the limit set by the coding standard. Additionally, any extra code that is not necessary can be removed to reduce the general complexity of the class and improve readability.
The coding standard rule that is violated by the code is the Coupling Between Objects (CBO) metric. This metric measures the number of different classes and interfaces that a class depends on. A high CBO value indicates that the class is tightly coupled with other classes and interfaces, which makes it harder to maintain and test. The recommended CBO value for Adobe Commerce classes is less than 13. To reduce the CBO value of Myservice, the Architect should introduce a new class that encapsulates the five scalar parameters that configure the behavior of Myservice. This way, the constructor of Myservice will only depend on one additional class instead of five scalars, and the CBO value will be reduced by four. Reference: https://devdocs.magento.com/guides/v2.4/coding-standards/code-standard-php.html#coupling-between-objects

NEW QUESTION # 29
An Adobe Commerce Architect is supporting deployment and building tools for on-premises Adobe Commerce projects. The tool is executing build scripts on a centralized server and using an SSH connection to deploy to project servers.
A client reports that users cannot work with Admin Panel because the site breaks every time they change interface locale.
Considering maintainability, which solution should the Architect implement?

• A. Adjust the tool's build script and specify required locales during 'setup:static-content:deploy' command
• B. Modify project config.php file, configure 'admin_locales_for_deploy' value, and specify all required locales
• C. Edit project env.php file, configure 'admin_locales_for.build' value, and specify all required locales

Answer: C

Explanation:
Editing project env.php file, configuring 'admin_locales_for.build' value, and specifying all required locales is the solution that the Architect should implement. This is because this configuration allows the tool to generate static content for different locales during the build phase, which improves performance and avoids breaking the site when changing interface locale. See Deploy static view files in the Adobe Commerce Help Center1. Reference: https://experienceleague.adobe.com/docs/commerce-operations/configuration-guide/cli/static-view/static-view-file-deployment.html?lang=en1

NEW QUESTION # 30
While reviewing a newly developed pull request that refactors multiple custom payment methods, the Architect notices multiple classes that depend on \Magento\Framework\Encryption\EncryptorInterf ace to decrypt credentials for sensitive data. The code that is commonly repeated is as follows:

In each module, the user_secret config is declared as follows:

The Architect needs to recommend an optimal solution to avoid redundant dependency and duplicate code among the methods. Which solution should the Architect recommend?

• A. Add a plugin after the getvalue method of $sccpeConfig, remove the $encryptor from dependency and use it in the plugin to decrypt the value if the config name is 'user.secret?
• B. Replace all Vendor\PaymentModule\Gateway\Config\Config Classes With virtualTyp- Of Magento\Payxer.t\Gateway\Conflg\Config and Set <user_secret backend_Model="Magento\Config\Model\Config\Backend\Encrypted" /> under ccnfig.xml
• C. Create a common config service class vendor\Payment\Gateway\config\Config under Vendor.Payment and use it as a parent class for all of the Vender \EaymentModule\Gateway\Config\Config Classes and remove $sccpeConfig and $encryptor dependencies

Answer: C

Explanation:
To avoid redundant dependency and duplicate code among the methods, you need to use the following solution:
Create a standard controller route and mapping the internal URLs (such as news/article/view/id/1) to rewrites that are generated on save and then stored in the URL rewrites table. This solution will leverage the built-in URL rewrite functionality of Magento to handle the news requests. You can create a standard controller route that handles the internal URLs and loads the news article by its ID. Then, you can generate URL rewrites for each news article based on its date and URL key and store them in the URL rewrites table. This way, you can avoid using a custom router or a plugin and reduce the code complexity.
Reference:
https://devdocs.magento.com/guides/v2.4/extension-dev-guide/routing.html
https://devdocs.magento.com/guides/v2.4/extension-dev-guide/url-rewrite.html

NEW QUESTION # 31
An external system integrates functionality of a product catalog search using Adobe Commerce GraphQL API.
The Architect creates a new attribute my_attribute in the admin panel with frontend type select.
Later, the Architect sees that Productinterface already has the field my_atcribute, but returns an mc value. The Architect wants this field to be a new type that contains both option id and label.
To meet this requirement, an Adobe Commerce Architect creates a new module and file etc/schema.graphqls that declares as follows:

After calling command setup:upgrade, the introspection of Productlnterface field xy_attribute remains int.
What prevented the value type of field my_attribute from changing?

• A. The fields of Productlnterface are checked during processing schema.graphqls files. If they have a corresponding attribute, then the backendjype of product attribute is set for field type.
• B. The interface Productlnterface is already declared in Magento.CatalogGraphQI module. Extending requires use of the keyword -xceni before a new declaration of Productlnterface.
• C. The Magento.CatalogGraphQI module occurs later in sequence than the Magento.GraphQI module and merging output of dynamic attributes schema reader overrides types declared in schema.graphqls

Answer: C

Explanation:
Explanation
products query is a GraphQL query that returns information about products that match specified search criteria. It also shows how to use ProductInterface fields to retrieve product data.
https://devdocs.magento.com/guides/v2.3/graphql/queries/products.html

NEW QUESTION # 32
An Adobe Commerce Architect needs to customize the workflow of a monthly installments payment extension. The extension is from a partner that is contracted with the default website PSR which has its own legacy extension (a module using deprecated payment method).
The installment payment partner manages only initializing a payment, and then hands the capture to be executed by the PSP. Once the amount is successfully captured, the PSP notifies the website through an IPN.
The goal of the IPN is only to create an "invoice" and save the 'capture information' to be used later for refund requests through the PSP itself.
The Architect needs the most simple solution to capture the requested behavior without side effects.
Which solution should the Architect implement?

• A. Change the can_ capture attribute for the payment method under config.xml to be
  <can_capture>0</can_capture>
• B. Add a plugin before the $invoice-> () and changes its input to prevent the call of the $payment-> capture()
• C. Declare a capture command with type Magento\payment\Gateway\Command\NullCommand for the payment method CommandPool in di.zm1

Answer: C

Explanation:
Explanation
The best solution for the Adobe Commerce Architect to implement in order to capture the requested behavior without side effects is to declare a capture command with type Magento\payment\Gateway\Command\NullCommand for the payment method CommandPool in di.xml. This will allow the partner to initialize the payment and then hand the capture over to the PSP, while also preventing the website from calling the $payment->capture() method. It will also allow the PSP to notify the website through an IPN, which will create an "invoice" and save the 'capture information' to be used later for refund requests through the PSP itself.

NEW QUESTION # 33
An Adobe Commerce Architect is reviewing api-functional test code. Some tests send errors to indicate that the customer address does not exist.
The test codes show the following:

Which steps should the Architect take to fix the test errors?

• A.
• B.
• C.

Answer: C

Explanation:
The test errors are caused by using the wrong customer ID and address ID in the request. The correct customer ID and address ID should be obtained from the response of the previous request to create a customer and an address. The test code should use $this->customer->getId() and $this->address->getId() instead of hard-coded values. Reference: https://devdocs.magento.com/guides/v2.4/get-started/web-api-functional-testing.html

NEW QUESTION # 34
An Adobe Commerce Architect needs to scope a bespoke news section for a merchant's Adobe Commerce storefront. The merchant's SEO agency requests that the following URL structure:
news/{date}/{article_url_key}l where {date} is the publication date of the article, and {article_url_key} is the URL key of the article.
The Architect scopes that a news entity type will be created. The date and URL key data will be stored against each record and autogenerated on save. The values will be able to be manually overridden.
The Architect needs to manage routing this functionality and adhere to best practice.
Which two options should the Architect consider to meet these requirements? (Choose two.)

• A. Create a custom router that runs before the standard router and matches the news portion of the URL.then looks for and loads a news article by matching the date and URL key parts of the URL.
• B. Create an observer that listens to the controllers_front_send_response_before event, looks for the mm portion of the URL, and If it matches, loads the relevant news article by matching the URL date and URL key parts.
• C. Create a standard controller route and an Index/Index index controller class that loads the relevant news article by matching the URL date and URL key parts.
• D. Create a plugin that intercepts lu^jentoXFraBeworkUppXActien::executed, looks for the news portion of the URL and if it matches, loads the relevant news article by matching the URL date and URL key parts.
• E. Create a standard controller route and mapping the internal URLs (such as news/article/view/id/1) to rewrites that are generated on save and then stored in the URL rewrites table.

Answer: A,C

Explanation:
Explanation
creating a custom router involves several steps, such as:
* Creating a routes.xml file to declare a custom route ID and front name
* Creating a Router.php file to define the custom router class that extends Magento\Framework\App\Router\Base
* Creating an etc/di.xml file to register the custom router class with a specific sortOrder
* Creating controller classes and action methods to handle the requests Based on these steps, I would say that two possible options that the Architect should consider to meet these requirements are:
* A. Create a standard controller route and an Index/Index index controller class that loads the relevant news article by matching the URL date and URL key parts.
* E. Create a custom router that runs before the standard router and matches the news portion of the URL, then looks for and loads a news article by matching the date and URL key parts of the URL.

NEW QUESTION # 35
An Adobe Commerce Architect designs a data flow that contains a new product type with its own custom pricing logic to meet a merchant requirement.
Which three developments are valid when reviewing the implementation? (Choose three.)

• A. New price model extending \Magento\Catalog\Model\Product\Type\Price
• B. Data patch to register the new product type
• C. Custom type model extended from the abstract Product Type model
• D. Hydrator for attributes belonging to the new product type
• E. A new class with custom pricing logic, extending the abstract Product model class
• F. Content of the etc/product_types.xml file

Answer: A,C,F

Explanation:
To create a new product type with its own custom pricing logic, you need to consider the following developments:
Content of the etc/product_types.xml file. This file will define the name, label, modelInstance, and priceModel of the new product type. The modelInstance will specify the custom type model that extends from the abstract Product Type model. The priceModel will specify the new price model that extends \Magento\Catalog\Model\Product\Type\Price.
Custom type model extended from the abstract Product Type model. This model will implement the logic and behavior of the new product type, such as how to prepare product for cart, how to process buy request, how to check product options, etc.
New price model extended \Magento\Catalog\Model\Product\Type\Price. This model will implement the custom pricing logic for the new product type, such as how to calculate final price, tier price, minimal price, etc.
Reference:
1: https://meetanshi.com/blog/create-custom-product-type-in-magento-2/

NEW QUESTION # 36
An external system integrates functionality of a product catalog search using Adobe Commerce GraphQL API. The Architect creates a new attribute my_attribute in the admin panel with frontend type select.
Later, the Architect sees that Productinterface already has the field my_atcribute, but returns an mc value. The Architect wants this field to be a new type that contains both option id and label.
To meet this requirement, an Adobe Commerce Architect creates a new module and file etc/schema.graphqls that declares as follows:

After calling command setup:upgrade, the introspection of Productlnterface field xy_attribute remains int. What prevented the value type of field my_attribute from changing?

• A. The fields of Productlnterface are checked during processing schema.graphqls files. If they have a corresponding attribute, then the backendjype of product attribute is set for field type.
• B. The interface Productlnterface is already declared in Magento.CatalogGraphQI module. Extending requires use of the keyword -xceni before a new declaration of Productlnterface.
• C. The Magento.CatalogGraphQI module occurs later in sequence than the Magento.GraphQI module and merging output of dynamic attributes schema reader overrides types declared in schema.graphqls

Answer: C

Explanation:
products query is a GraphQL query that returns information about products that match specified search criteria. It also shows how to use ProductInterface fields to retrieve product data.
https://devdocs.magento.com/guides/v2.3/graphql/queries/products.html
The Magento.CatalogGraphQI module occurs later in sequence than the Magento.GraphQI module and merging output of dynamic attributes schema reader overrides types declared in schema.graphqls. The dynamic attributes schema reader is responsible for adding product attributes to the Productinterface based on the backend type of the attribute. Since the attribute my_attribute has a backend type of int, the field my_attribute in the Productinterface will also have a type of int, regardless of the custom type declared in the schema.graphqls file. To avoid this, the Architect should either change the backend type of the attribute to match the custom type, or use a different name for the field that does not conflict with the attribute name. Reference: https://devdocs.magento.com/guides/v2.4/graphql/develop/create-graphqls-file.html

NEW QUESTION # 37
An Adobe Commerce Architect is reviewing api-functional test code. Some tests send errors to indicate that the customer address does not exist.
The test codes show the following:

• A.
• B.
• C.

Answer: C

NEW QUESTION # 38
An Adobe Commerce Architect gets a request to change existing payment gateway functionality by allowing voided transactions only for a certain range of paid amounts.
In the vendor module file etc/config.xml,payment method has an option can,_voidsetto 1.
How should this customization be done?

• A. Add new handler with name can_void to virtualType based on typeMagento payment\Gateway\config\ValueHandlerPool In payment method facade configuration.
• B. Extend Magento\Payment\Model\\Method\Adapter and reimplement method void. Use this new class as a new type of payment method facade configuration overriding virtualType type for adapter.
• C. Declare a new plugin for class Magento\Payment\ Gateway\Config\ConfigValueHandler and using the afterHandle method, change the result for Subject can_void.

Answer: B

Explanation:
Explanation
payment facade is an instance of Payment Adapter configured with virtual types and allows to process payment actions between Magento Sales Management and payment processor. It also says that you can add dependency injection (DI) configuration for payment method facade in your %Vendor_Module%/etc/di.xml file.
https://devdocs.magento.com/guides/v2.3/payments-integrations/base-integration/facade-configuration.html

NEW QUESTION # 39
A company wants to build an Adobe Commerce website to sell their products to customers in their country.
The taxes in their country are highly complex and require customization to Adobe Commerce. An Architect is trying to solve this problem by creating a custom tax calculator that will handle the calculation of taxes for all orders in Adobe Commerce.
How should the Architect add the taxes for all orders?

• A. Add a new observer to the event 'sales_quote_collect_totals_before" and add the custom tax to the quote
• B. Declare a new total collector in "etc/sales.xml" in a custom module
• C. Write a before plugin to \Magento\Quote\Model\QuoteManagement::placeOrder() and add the custom tax to the quote

Answer: B

Explanation:
you can create tax rules in Magento 2 by going to Stores > Taxes > Tax Rules and choosing or adding tax rates.
However, this may not be enough for complex tax scenarios that require customization.
https://amasty.com/knowledge-base/how-to-configure-tax-calculation-in-magento-2.html
To add a new total to the order, the Architect should declare a new total collector in the "etc/sales.xml" file of a custom module.
This file defines the order of calculation and rendering of totals.
The Architect should also implement a model class that extends \Magento\Quote\Model\Quote\Address\Total\AbstractTotal and overrides the collect() and fetch() methods to handle the logic of adding the custom tax to the quote and order.
Reference: https://devdocs.magento.com/guides/v2.4/howdoi/checkout/checkout_new_total.html

NEW QUESTION # 40
An Architect is investigating a merchant's Adobe Commerce production environment where all customer session data is randomly being lost. Customer session data has been configured to be persisted using Redis, as are all caches (except full page cache, which is handled via Varnish).
After an initial review, the Architect is able to replicate the loss of customer session data by flushing the Magento cache storage, either via the Adobe Commerce Admin Panel or running bin/iuagento cache: flush on the command line. Refreshing all the caches in the Adobe Commerce Admin Panel or running bin/magento cache: clean on the command line does not cause session data to be lost.
What should be the next step?

• A. Set the 'Stores > Configuration' option for "Store Session Data Separately' to 'Yes' in the Adobe Commerce Admin Panel.
• B. Check app/etc/evn.php and make sure that the Redis configuration for caches and session data use different database numbers.
• C. Educate the merchant to not flush cache storage and only refresh the caches in future.

Answer: B

Explanation:
Checking app/etc/env.php and making sure that the Redis configuration for caches and session data use different database numbers is the next step. This is because using the same database number for both caches and session data can cause session data to be lost when flushing the cache storage. By using different database numbers, the session data can be isolated from the cache data and avoid being overwritten. See Use Redis for session storage in the Adobe Commerce Help Center1. Reference: https://experienceleague.adobe.com/docs/commerce-operations/configuration-guide/cache/redis/redis-session.html?lang=en1

NEW QUESTION # 41
A representative of a small business needs an Adobe Commerce Architect to design a custom integration of a third-party payment solution. They want to reduce the list of controls identified in their Self-Assessment Questionnaire as much as possible to achieve PCI compliance for their existing Magento application.
Which approach meets the business needs?

• A. Utilize the Advanced Encryption standard (AES-256) algorithm to encrypt all customer-sensitive data from the payment module.
• B. Utilize a trusted signed certificate issued by a Certification Authority (CA) to secure each connection made by the payment solution protocol via HTTPS.
• C. Utilize the payment provider Iframe system to isolate content of the embedded frame from the parent web page.

Answer: C

Explanation:
The Architect should utilize the payment provider iframe system to isolate content of the embedded frame from the parent web page. This approach will reduce the list of controls identified in their Self-Assessment Questionnaire as much as possible to achieve PCI compliance for their existing Magento application. By using an iframe, the payment provider handles all customer-sensitive data and Magento does not store or process any cardholder data. This reduces the PCI scope and simplifies the compliance process. Option B is incorrect because utilizing the Advanced Encryption Standard (AES-256) algorithm to encrypt all customer-sensitive data from the payment module will not reduce the PCI scope, but rather increase it. Magento will still store and process cardholder data, which requires more controls and validation. Option C is incorrect because utilizing a trusted signed certificate issued by a Certification Authority (CA) to secure each connection made by the payment solution protocol via HTTPS will not reduce the PCI scope, but rather ensure the security of data transmission. Magento will still store and process cardholder data, which requires more controls and validation. Reference: https://devdocs.magento.com/guides/v2.4/payments-integrations/payment-gateway/integration.html

NEW QUESTION # 42
A merchant is utilizing an out-of-the-box Adobe Commerce application and asks to add a new reward card functionality for customers. During the code review, the Adobe Commerce Architect notices the reward_card_number attribute setup created for this functionality is causing the customer attribute to be unavailable in the My account/My rewards page template.

What should be added to set the customer attribute correctly?

• A. system property should be added with a value of true
• B. group property should be added with a value of 1
• C. scope property should be added with a value of global

Answer: B

Explanation:
The group property specifies the attribute group ID that the customer attribute belongs to. By setting the group property to 1, the reward_card_number attribute will be added to the default attribute group and will be available in the My account/My rewards page template. Reference: https://devdocs.magento.com/guides/v2.4/extension-dev-guide/attributes.html#customer-eav-attribute

NEW QUESTION # 43
A merchant is using a unified website that supports native Adobe Commerce B2B and B2C with a single store view.
The merchant wants to show the B2B account features like negotiable quotes and credit limits in the header of the site on every page for the logged-in users who are part of a B2B company account.
Each B2B company has its own individual shared catalog and customer group, and many customer groups for non B2B customers change. The merchant requests that this should not be tied to customer groups.
Which two solutions should the Architect recommend considering public data and caching? (Choose two.)

• A. Check if the current user is part of a B2B company within a block class and modify the output accordingly.
• B. Set whether the current user is part of a B2B company in the customer session and use that data directly to modify the output accordingly.
• C. Create a new HTTP Context variable to allow for separate public content to be cached for users in B2B companies where the output can be modified accordingly.
• D. Create a plugin that switches the theme when a user is part of a B2B company so the output can be modified accordingly in the alternate theme.
• E. Create a new custom condition for customer segments that allow for choosing whether a user is part of a B2B company and then use this segment to modify the output accordingly.

Answer: C,E

Explanation:
C would involve creating a new custom condition for customer segments that allow for choosing if a user is part of a B2B company, and then use this segment to modify the output accordingly. E would involve creating a new HTTP Context variable to allow for separate public content to be cached for users in B2B companies, where the output can be modified accordingly.
To show the B2B account features in the header of the site on every page for the logged-in users who are part of a B2B company account, the Architect should recommend two solutions: C) Create a new custom condition for customer segments that allow for choosing whether a user is part of a B2B company and then use this segment to modify the output accordingly. This solution will allow the merchant to create a customer segment based on the custom condition and use it to display different content in the header for B2B users. E) Create a new HTTP Context variable to allow for separate public content to be cached for users in B2B companies where the output can be modified accordingly. This solution will ensure that the public content cache is varied based on the custom HTTP Context variable, which can be set based on whether the user is part of a B2B company or not. Option A is incorrect because switching the theme based on the user's B2B status is not a scalable or maintainable solution, and it will also affect the entire site's appearance, not just the header. Option B is incorrect because checking the user's B2B status within a block class will not work with public content cache, as it will not vary the cache based on that condition. Option D is incorrect because setting the user's B2B status in the customer session will not work with public content cache, as it will not vary the cache based on that data. Reference: https://devdocs.magento.com/guides/v2.4/extension-dev-guide/segmentation.html https://devdocs.magento.com/guides/v2.4/extension-dev-guide/cache/page-caching/public-content.html

NEW QUESTION # 44
An Architect is configuring the preload.keys for Redis on an Adobe Commerce on-premise instance.
The Architect discovers that the following cache keys are loaded on each frontend request: eav_entity_types, GLOBAL_PLUGIN_LIST, DB_IS_UP_TO_DATE , SYSTEM_DEFAULT.
* The id_prefix of the frontend =>page_cache is set to 061_.
* The id_prefix of frontend => default: is not set.
* The Architect has enabled and configured Redis L2 caching.
How should the preload.keys be configured?

• A.
• B.
• C.
• D.

Answer: A

NEW QUESTION # 45
An Architect needs to create an additional regional UK website with its own website currency set to GBP in Adobe Commerce. An existing US website is using USD as a default base and website currency.
After the first week of sales in the new UK website, an administrator notices that all sales totals in Sales Orders report show £0.00.
How should this issue be resolved?

• A. Make sure that orders are shipped and not left in processing state.
• B. Configure currency rates for GBP and USD, so they are not empty.
• C. Refresh Lifetime Statistics for "Total Invoiced".

Answer: B

Explanation:
Explanation
To do this, the Architect needs to configure the currency rates for both GBP and USD in the Admin Panel, so that the correct exchange rates are applied to each currency. This will ensure that the correct amounts are shown in the sales orders report, and will also make sure that the correct amount is charged to customers in the new UK website.

NEW QUESTION # 46
An Architect needs to integrate an Adobe Commerce store with a new Shipping Carrier. Cart data is sent to the Shipping Carrier's API to retrieve the price and display to the customer. After the feature is implemented on the store, the API hits its quota and returns the error "Too many requests". The Shipping Carrier warns the store about sending too many requests with the same content to the API.
In the carrier model, what should the Architect change to fix the problem?

• A. In _doShipmentRequest (), call canCollectRates() before sending request to the API
• B. Override getResponse (), save the response to a variable, check if the response exists, then return.
• C. Implement _setCachedQuotes () and_getCachedQuotes() return the data if the request matches.

Answer: C

Explanation:
Explanation
Implementing setCachedQuotes () andgetCachedQuotes() in the carrier model can allow the store to store the cart data in a cache, so that repeated requests with the same content can be retrieved from the cache instead of sending a new request to the API. This can reduce the number of requests and avoid hitting the quota limit.
References:
[1] https://docs.adobe.com/content/help/en/experience-manager-65/commerce/commerce-payment-shipping-mod

NEW QUESTION # 47
Since the last production deployment, customers can not complete checkout. The error logs show the following message multiple times:

The Architect finds a deployed feature that should limit delivery for some specific postcodes.
The Architect sees the following code deployed in/webapi_rest \di .xml and etc\frontend\di xml

Which step should the Architect perform to solve the issue?

• A. Inject an instance of \Magentro\Quote\API\CartRepostoryInterface and receive cart instance via$this->cartRepository->get($this-session->getQucteId())
• B. Change 'after' plugin with 'around' plugin. The issue is being caused by calling the result provider code after the code of the original method.
• C. Replace the injected dependency
  \Magento\Checkout\Model\Session\With\Magento\Framework\Session\SessionManagerInterface

Answer: B

NEW QUESTION # 48
An Adobe Commerce Architect runs the PHP Mess Detector from the command-line interface using the coding standard provided with Adobe Commerce. The following output appears:

The Architect looks at the class and notices that the constructor has 15 parameters. Five of these parameters are scalars configuring the behavior of Kyservice.
How should the Architect fix the code so that it complies with the coding standard rule?

• A. Modify the code of Myserviceso that the number of different classes and interfaces referenced anywhere inside the class is less than 13
• B. Modify the code of Myserviceso the number of different classes, interfaces, and scalar types used as parameters in the constructor and other methods is less than 13
• C. Introduce a new class accepting those five scalars and use it in the constructor and the remaining logic of Myservice

Answer: C

Explanation:
Explanation
The best way to fix the code so that it complies with the coding standard rule is to introduce a new class accepting those five scalars and use it in the constructor and the remaining logic of Myservice. This will reduce the number of different classes, interfaces, and scalar types used as parameters in the constructor and other methods to less than 13, which is the limit set by the coding standard. Additionally, any extra code that is not necessary can be removed to reduce the general complexity of the class and improve readability.

NEW QUESTION # 49
An Adobe Commerce system is configured to run in a multi-tier architecture that includes:
* A cache server with Varnish installed
* A backend web server with Adobe Commerce installed
* A database server with MySQL installed
When an Adobe Commerce Architect tries to clean the cache from the Store Admin by using the "Flush Magento Cache" in Cache Management, the Full Page Cache does not clear.
Which two steps should the Architect take to make the Full Page Cache work properly? (Choose two.)

• A. Set the backend destination host to the frontend server's address in the Store Admin Stores > Configuration > Advanced > System > Full Page Cache > Varnish Configuration > Backend Host
• B. Set the cache destination host using magento CLIbin/magento setup:config:set
  --http-cache-hosts<cache_server>:<varrnish port>
• C. Set the backend port destination to the frontend server's Varnish port in the Store Admin Stores > Configuration > Advanced > System > Full Page Cache > Varnish Configuration > Backend Port
• D. Set the cache type to "Varnish Caching" in the Store Admin.
  Stores > Configuration > Advanced > System > Full Page Cache > Caching Application
• E. Use "Flush Cache Storage" instead of "Flush Magento Cache"

Answer: A,C

NEW QUESTION # 50
An Adobe Commerce Architect needs to ensure zero downtime during the deployment process of Adobe Commerce on-premises. Which two steps should the Architect follow? (Choose two.)

• A. Enable config flag under developer/zere _down_time/enabled
• B. Enable config flag under deployment/blue_ green/enabled
• C. Rim bin/magento setup:upgrade --convert-old-scripts=true to Upgrade database
• D. Run bin/magento setup:upgrade --keep-generated to Upgrade database
• E. Run bin/magento setup:upgrade -dry-run=true to upgrade database

Answer: B,D

Explanation:
To ensure zero downtime during the deployment process of Magento 2 on-premises, the Architect should follow two steps:
Run bin/magento setup:upgrade --keep-generated to upgrade database. This will skip the regeneration of static content and code files during the upgrade process, which can take a long time and cause downtime. The static content and code files should be generated separately before or after the upgrade process.
Enable config flag under deployment/blue_green/enabled. This will enable the blue-green deployment strategy, which creates a copy of the current production environment (blue) and deploys the new code to it (green). Then, it switches the traffic from the blue environment to the green environment without any downtime. This option can be enabled by adding a line like deployment/blue_green/enabled: true to the .magento.env.yaml file.

NEW QUESTION # 51
An Adobe Commerce Architect is working on a sales campaign to present a new product on the site that allows the purchase of a pre-defined set of products with a discount. Each product in the set should have a separate stock and tax class.
One requirement is to use a third-party system to build reports with REST API to fetch the following data:
* SKU
* Qty
* Original price
* Sales price
* Tax amount
Which solution should the Architect use to meet these requirements?

• A. * Create Grouped Product and Create after plugin on
  \Magento\GroupedProduct\Model\Product\Type\Grouped:preparedForCarrAdvanced for bunch products ordering;
  * Utilize Content Staging to manage special prices on time for the campaign for simple products;
  * Expose required data via Adobe Commerce Order API;
• B. * Create Fixed Bundle Product for gathering simple products;
  * Manage price for every selected option;
  * Add extension attribute original_simple_price for
  \Magento\Sales\Api\Data\OrderItemExtensionInterface and populate value with price of simple product;
• C. * Create Dynamic Bundle Product for gathering simple products;
  * Utilize Content Staging to manage special prices for bundle products on time for the campaign;
  * Expose required data via Adobe Commerce Order API;

Answer: C

Explanation:
Explanation
A bundle product is a customizable product that consists of several options, each based on a simple or virtual product. A grouped product is a collection of simple products that are presented as a group.
According to some tutorials , creating a bundle product in Adobe Commerce involves several steps, such as:
* Choosing the bundle product template and attribute set
* Completing the required settings, such as name, SKU, price, and weight
* Configuring the basic settings, such as status, visibility, and categories
* Adding the bundle options and associated products
* Adding optional product information, such as images and meta data
* Posting the product
Content staging is a feature that allows creating, previewing, and scheduling content updates for your store directly from the Admin . You can use content staging to create campaigns that include changes to products, categories, pages, blocks, widgets, price rules, and more.
Based on these steps and features, I would say that one possible solution that the Architect should use to meet these requirements is:
* B. Create Dynamic Bundle Product for gathering simple products; Utilize Content Staging to manage special prices for bundle products on time for the campaign; Expose required data via Adobe Commerce Order API; This solution would allow creating a new product that allows the purchase of a pre-defined set of products with a discount. Each product in the set would have a separate stock and tax class. The special prices for bundle products could be managed using content staging. The required data could be exposed via Adobe Commerce Order API.

NEW QUESTION # 52
......

Adobe AD0-E718 (Adobe Commerce Architect Master) Certification Exam is a comprehensive test that measures one's skills and knowledge in Adobe Commerce. AD0-E718 exam is designed to evaluate the competency of professionals who are responsible for designing and implementing complex Adobe Commerce solutions. Passing this certification exam is a great way to demonstrate your expertise in Adobe Commerce and showcase your skills to potential employers.

 

Guaranteed Success in Adobe Commerce AD0-E718 Exam Dumps: https://www.trainingdumps.com/AD0-E718_exam-valid-dumps.html

Adobe AD0-E718 Daily Practice Exam New 2023 Updated 50 Questions: https://drive.google.com/open?id=1VqTVvsVyLaikQWTRDFUvYDyyFeHqiKpf