Exam Dumps 700-905 Practice Free Latest Cisco Practice Tests
700-905 Exam Questions | Real 700-905 Practice Dumps
NEW QUESTION 15
Which two features enable RAID cards striping as well as mirroring and parity? (Choose two.)
- A. Hot replacement of drives available, depending on configuration
- B. Distributed drives across disparate systems can be in RAID together.
- C. No load on the system resources, drives seem as one drive to the operating system
- D. On RAID card failure, the RAID onboard concurrent cache assists rebuild cache.
- E. Integration with Cisco Intersight for a cloud-based storage management solution.
Answer: A,C
Explanation:
NEW QUESTION 16
Which three functionalities are provided by VAAI? (Choose three.)
- A. VAAI uses RAID to consolidate disks into a shared data platform.
- B. When a native snapshot is requested, the request is processed by the hypervisor.
- C. Missing pieces of data are re-created from the remaining nodes in service
- D. VAAI performs caching, deduplication: and compression of data.
- E. Instead of the snapshot being performed in hypervisor it is offloaded to Cisco HXDP.
- F. Cisco HXDP creates a file system native snapshot which is registered in the vSphere.
Answer: B,E,F
Explanation:
NEW QUESTION 17
Which statement about Standalone Cisco UCS Server Deployments is valid?
- A. They require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx)
associated with the deployment - B. They do not require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses
(OpEx) associated with the deployment - C. They require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx)
associated with the deployment - D. They do not require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx)
associated with the deployment
Answer: A
NEW QUESTION 18
Cisco HyperFlex AII-NVMe nodes are expected to be supported beginning in which HXDP version'?
- A. HXDP 4.0
- B. HXDP 3.5.1
- C. HXDP 4.0.1
- D. HXDP 3 5.2
Answer: A
Explanation:
NEW QUESTION 19
HyperFlex compute nodes contribute what percentage of the overall disk storage capacity?
- A. 20%
- B. 0%
- C. 10%
- D. 5%
Answer: B
Explanation:
NEW QUESTION 20
What is the minimum amount of memory required for an HX node?
- A. 32 GB
- B. 64 GB
- C. 128 GB
- D. 192 GB
Answer: C
Explanation:
NEW QUESTION 21
Which two processes does failure on a node initiate? (Choose two.)
- A. Affected node is marked as unhealthy and placed into standby mode
- B. The system is marked unhealthy but remains operational.
- C. A call-home process is initiated and the failure is reported to TAC
- D. The VMs on the failed node are moved to another node by vSphere high availability
- E. Distributed pooled data is migrated off nodes to master data store.
Answer: B,D
Explanation:
NEW QUESTION 22
How can the maximum 10 performance be achieved?
- A. Use the HX 240 with all SAS drives
- B. Use the HX 220 with all SAS drives
- C. Use the HX 220 with all flash drives
- D. Use the HX 240 with all flash drives
Answer: D
NEW QUESTION 23
Which uses for the system drive in an HX node are valid? (Choose two.)
- A. Write Cache
- B. Migration
- C. Virtual machine store
- D. Saving and restoring program state
- E. Garbage collection
Answer: D,E
Explanation:
NEW QUESTION 24
What is the maximum size of an HXDP cluster running 3.5.1?
- A. 32 nodes
- B. 8 nodes
- C. 64 nodes
- D. 16 nodes
Answer: C
NEW QUESTION 25
What does the letter W indicate when selecting CPUs for your HX Node (le. HX-CPU 8170M)?
- A. support for all flash drive array
- B. support of 1.5 TB/socket of memory
- C. support for NVMe
- D. support for 768 TB/socket of memory
Answer: B
NEW QUESTION 26
HyperFlex compute nodes contribute what percentage of the overall disk storage capacity?
- A. 20%
- B. 0%
- C. 10%
- D. 5%
Answer: C
NEW QUESTION 27
How many separate VLANs must each HyperFlex node be configured with running ESXi?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 28
Which two processes does failure on a node initiate? (Choose two.)
- A. Affected node is marked as unhealthy and placed into standby mode
- B. The system is marked unhealthy but remains operational.
- C. A call-home process is initiated and the failure is reported to TAC
- D. The VMs on the failed node are moved to another node by vSphere high availability
- E. Distributed pooled data is migrated off nodes to master data store.
Answer: B,D
NEW QUESTION 29
Which two ways does Cisco HyperFlex upgrade the traditional RAID? (Choose two.)
- A. Distributing data locally, not just across the hosts in HyperFlex cluster
- B. HyperFlex enables stretched RAID arrays spanning multiple geographic sites.
- C. Hardware replacement initiates self-healing with minimal impact
- D. Limiting the number of drives locally, which are not a part of the shared datastore.
- E. Eliminating the need for additional hardware cards, while maintaining high performance.
Answer: C,E
Explanation:
NEW QUESTION 30
In all HX server types, where are capacity drives installed?
- A. top
- B. front
- C. side
- D. back
Answer: B
Explanation:
NEW QUESTION 31
HyperFlex uses file system native snapshots and provides which three features? (Choose three.)
- A. automatic update to the golden image when a configuration change is made
- B. automatically deduplicating data of snapshots through StorFS
- C. limitations in age and number of snapshots. See user manual for limitations
- D. on datastore level, snapshots work the same as vSphere snapshots
- E. consolidation of snapshots is still manual but not necessary
- F. impact on the VM performance after a lot of writes, requiring future administration
Answer: B,C,D
NEW QUESTION 32
What does the letter W indicate when selecting CPUs for your HX Node (le. HX-CPU 8170M)?
- A. support for all flash drive array
- B. support of 1.5 TB/socket of memory
- C. support for NVMe
- D. support for 768 TB/socket of memory
Answer: B
Explanation:
NEW QUESTION 33
How many vCPUs does the HXDP controller VM require?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
NEW QUESTION 34
Refer to the exhibit. Which VIC model supports two wire connectivity to each Fabric Interconnect?
- A. VIC 1457
- B. VIC 1227
- C. VIC 1387
- D. VIC 1557
Answer: C
Explanation:
NEW QUESTION 35
Drag the server type from the left onto the maximum number of capacity drives on the right.
Which three capabilities are provided by Virtual Interface Cards'? (Choose three.)
- A. The virtual interfaces created by a VIC do not accommodate hypervisor communication like VMkernel
interfaces on vSphere. - B. Virtualizing object storage environments by pushing meta data directly to the management server
- C. A virtual environment, such as VMware vSphere, provides VM connectivity via a virtual switch to
individual virtual machines bypassing local hardware requests. - D. Multiple-interface-card virtualization without any additional driver requirements with integration of the
virtualized cards into the Fabric Interconnect infrastructure. - E. Management through Cisco IMC or UCS Manager with dynamic configuration of virtual interface cards
based on the server profile (MAC/WWN). - F. Traffic processing for internal and external communication supporting simultaneous HBA and NIC
operation on the same physical hardware.
Answer: C,D,E
NEW QUESTION 36
Which statement about Standalone Cisco UCS Server Deployments is valid?
- A. They require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx) associated with the deployment
- B. They require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx) associated with the deployment
- C. They do not require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx) associated with the deployment
- D. They do not require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx) associated with the deployment
Answer: D
Explanation:
NEW QUESTION 37
When cabling a given HX node to the Fabric Interconnect which three actions are required? (Choose three.)
- A. Connect the node to the same port number on each of the two Fabric Interconnects.
- B. Connect server port L2 to Fabric Interconnect port L2
- C. Connect port 2 on the VIC to Interconnect B.
- D. Connect server port L1 to Fabric Interconnect port L1.
- E. Connect the node to different port numbers on each of the two Fabric Interconnects.
- F. Connect port 1 on the VIC to Fabric Interconnect A.
Answer: A,C,F
NEW QUESTION 38
......
Cisco 700-905 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
Verified 700-905 Exam Dumps Q&As - Provide 700-905 with Correct Answers: https://www.trainingdumps.com/700-905_exam-valid-dumps.html
