2021 Verified DES-DD33 dumps Q&As on your DCS-SA Exam Questions Certain Success!
DES-DD33 Exam Dumps - 100% Marks In DES-DD33 Exam!
NEW QUESTION 11
Which PowerProtect DD technology provides fast and efficient deduplication while minimizing disk access?
- A. SISL
- B. Cloud Tier
- C. Cache Tier
- D. DIA
Answer: B
NEW QUESTION 12
What is a requirement to use the PowerProtect DD HA feature?
- A. Head units and notes require an active/active configuration
- B. Dual set of shared storage configuration
- C. Each head unit requires its own FS25 shelf
- D. A single set of shared storage
Answer: B
NEW QUESTION 13
A backup administrator is tasked with verifying the compression savings of a PowerProtect DD9900.
Which compression algorithm will they see enabled by default?
- A. lzw
- B. gz
- C. lz
- D. gzfast
Answer: D
Explanation:
The gzfast compression algorithm is the default local compression method used on all DD6900, DD9400, and DD9900 appliances.
NEW QUESTION 14
A Spectrum Protect administrator is configuring VTL on PowerProtect DD.
Which tape driver type should they select?
- A. L2000
- B. L6000
- C. TS3500
- D. L180
Answer: C
NEW QUESTION 15
How many hops should the fabric configuration be limited to when implementing the DD VTL?
- A. 1 hop
- B. 2 hops
- C. 4 hops
- D. 3 hops
Answer: B
Explanation:
Maximum number of hops is two, that is, three DD systems. Directory-to-MTree migration supports backward compatibility up to two previous releases.
NEW QUESTION 16
Following best practices for a PowerProtect DD NFS environment, what is the recommended value for rsize and wsize?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 17
When should using Virtual Synthetic backups be considered?
- A. Backups are nonfile system data such as databases
- B. Daily incremental backups are larger than 15% of a normal full backup
- C. PowerProtect DD appliance has more than 10 disks
- D. Backups are large and localized
Answer: B
NEW QUESTION 18
Which protocol is used with Dell EMC Cloud Tier to transfer data between a PowerProtect DD appliance and the cloud?
- A. FTP
- B. NFS
- C. HTTPS
- D. SFTP
Answer: B
Explanation:
A DD series appliance at a Faction data center can be used as single backup target to protect workloads across multiple clouds. Using DD Boost, CIFS, and NFS protocols.
NEW QUESTION 19
Which NDMP device is supported on a PowerProtect DD appliance?
- A. VTL
- B. NFS
- C. CIFS
- D. DD Boost
Answer: A
Explanation:
A system can present itself as a file server, offering NFS, CIFS access over Ethernet; as a virtual tape library (VTL) over Fibre Channel; as an NDMP tape server over Ethernet; or as a disk target using application specific interfaces like DD Boost. DD VTL is qualified with leading open systems and IBMi enterprise backup applications.
NEW QUESTION 20
Backup administrators have noticed slow backups on the AIX environment.
To fix the issue, what should the set large_send be for each NIC, and what should the NFS option be set to?
- A. no and nfs_rfc1323=0
- B. yes and nfs_rfc1323=0
- C. no and nfs_rfc1323=1
- D. yes and nfs_rfc1323=1
Answer: D
NEW QUESTION 21
What is the correct sequence of steps to configure storage for Dell EMC Cloud Tier in the DD System Manager?
Answer:
Explanation:
NEW QUESTION 22
Which statement is correct regarding backup flow without PowerProtect DD?
- A. Data is replicated between primary storage and tape storage
- B. Only the backup server connects directly to tapes and saves the backup
- C. Both the backup server and backup clients connect directly to tapes and save the backup
- D. Only backup clients connect directly to tapes and save the backup
Answer: B
NEW QUESTION 23
How can remote logging with a syslog server be configured on a PowerProtect DD system?
- A. Remote logging is enabled by default
- B. Use the DDSM to enable the remote logging
- C. Use the CLI command log host enable
- D. Use the DDMC to enable the remote logging
Answer: C
NEW QUESTION 24
When using the DD VTL Tape Out to Cloud feature, which status will a tape show once it is in the cloud tier vault?
- A. Vaulted
- B. Offline
- C. Offsite
- D. Archived
Answer: D
NEW QUESTION 25
A backup administrator wants to verify that quotas have been enabled on a PowerProtect DD appliance.
Which command is used to verify that quotas are being enforced?
- A. quota capacity reset
- B. quota capacity set
- C. quota capacity status
- D. mtree show quota
Answer: B
NEW QUESTION 26
......
EMC DES-DD33 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
Pass Your DES-DD33 Exam Easily With 100% Exam Passing Guarantee: https://www.trainingdumps.com/DES-DD33_exam-valid-dumps.html
