010-151 Exam Info and Free Practice Test Professional Quiz Study Materials
Accurate Hot Selling 010-151 Exam Dumps 2025 Newly Released
To get more information visit:
Cisco Certified Technician Data Center (010-151) Exam Reference
NEW QUESTION # 16 
Refer to the exhibit. Which item lists all available functions that can be perform to the server?
- A. B
- B. C
- C. D
- D. A
Answer: D
NEW QUESTION # 17
Refer to the exhibit.
Refer to the exhibit. Which component is identified as D in the UCS C480 ML M5?
- A. Fan modules
- B. Supercap for front RAID controller
- C. NVIDIA V100 SXM2 GPUs and heatsinks
- D. RAID controller card for front-loading SAS/SATA drives
Answer: D
NEW QUESTION # 18
What is the correct path to verify the Overall Status of Chassis 1 | Server 3?
- A. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 FSM tab
- B. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
- C. Status Tab > Chassis > Chassis 1 > Servers > Server 3
- D. Admin Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
- E. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 Status tab
- F. Servers Tab > Chassis > Server 3 General tab
Answer: B
NEW QUESTION # 19
Refer to the exhibit.
What is the name of this Cisco Nexus 3000 Series Switch?
- A. Cisco Nexus 3132Q
- B. Cisco Nexus 3524
- C. Cisco Nexus 3172PQ
- D. Cisco Nexus 3016
Answer: A
NEW QUESTION # 20
What do the small form-factor, x86 64-bit blade servers reside in Cisco branch-office router?
- A. Cisco UCS Blade Servers
- B. Cisco UCS S-Series Storage Servers
- C. Cisco UCS E-Series Servers
- D. Cisco UCS C-Series Rack-Mount Servers
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-e-series-servers/ datasheet-c78-737706.pdf page 3
NEW QUESTION # 21
What are two typical steps for troubleshooting a rack server with unrecognized or memory errors? (Choose two.)
- A. Check the front I/O cable connection to the motherboard.
- B. Check CPU sockets for bent pins.
- C. Check that the AC power cord is OK.
- D. Ensure DIMMs are installed in correct slots.
- E. Reseat DIMMs.
Answer: D,E
NEW QUESTION # 22
Which type of optics module is supported by a 12-port 100 GE Cisco Nexus 7700 F3 Series I/O module?
- A. SFP/SFP+
- B. CPAK
- C. QSFP+
- D. CFP
Answer: B
NEW QUESTION # 23
Which two form factors are available in the Cisco UCS E-Series Servers? (Choose two.)
- A. NIM
- B. PVDM
- C. VIC
- D. WIC
- E. EHWIC
Answer: A,E
NEW QUESTION # 24
Which three components are hot swappable in a Cisco UCS Blade Server and Chassis? (Choose three.)
- A. Heat sink
- B. Fabric Extender
- C. Power supply
- D. 2x8GB Kit DIMMs
- E. Mezzanine card
- F. SAS Hard Drive
Answer: B,C,F
NEW QUESTION # 25
Which two cable types can support 10Gbps speed? (Choose two.)
- A. CAT5a
- B. CAT5
- C. CAT7
- D. CAT5e
- E. CAT6a
Answer: C,E
NEW QUESTION # 26
Refer to the exhibit.
What is the name of this Cisco Nexus 3000 Series Switch?
- A. Cisco Nexus 3132Q
- B. Cisco Nexus 3524
- C. Cisco Nexus 3172PQ
- D. Cisco Nexus 3016
Answer: A
NEW QUESTION # 27
In Cisco UCS C480 M5 server, which PCle slot is the default slot for the rear RAID controller when the rear drive module is used with SAS/SATA drives?
- A. PCle slot 12
- B. PCle slot 11
- C. PCle slot 09
- D. PCle slot 10
Answer: B
NEW QUESTION # 28 
Refer to the exhibit. Match the Fault Icons to the appropriate description.
Answer:
Explanation:
NEW QUESTION # 29
Which command syntax is correct to reset the admin password when the switch is in the kickstart prompt "switch(boot) #"?
- A. connect nxos -> admin-password <password>
- B. configure terminal -> admin-password <password>
- C. admin-password <password>
- D. connect local-mgmt -> admin-password <password>
- E. exec -> admin-password <password>
Answer: B
NEW QUESTION # 30
Up to what speed can Category 5 UTP cable transmit data?
- A. 100 Mb/s
- B. 10000 Mb/s
- C. 1000 Mb/s
- D. 10 Mb/s
Answer: C
NEW QUESTION # 31
Which three troubleshooting procedures do you perform when there is no power to a Cisco UCS B250 M2 Blade Server? (Choose three.)
- A. Check the back of the blade to ensure that there is no damage to the connection that goes into chassis.
- B. Check the CPU sockets for bent pins.
- C. Reseat the blade in the same slot in the chassis.
- D. Decommission and acknowledge the blade.
- E. Move the blade to another slot in the chassis.
- F. Reseat the memory DIMMs.
Answer: A,C,E
NEW QUESTION # 32
Which statement is true about SFP?
- A. The small form-factor pluggable (SFP) is a compact, hot-pluggable copper module transceiver.
- B. SFP modules offer a simple and effective way to connect a single network device to a wide variety of fiber cable types.
- C. SFP modules convert the serial electrical signals to serial analog signals and vice versa.
- D. SFP modules can be classified based on the working voltage and size.
Answer: B
Explanation:
Explanation/Reference: http://www.carritech.com/news/sfps-used-telecommunication-systems/
NEW QUESTION # 33
Where do you find the model number of a Cisco MDS 9200 Series chassis?
- A. on the top front of the chassis next to the Cisco logo
- B. on the bottom front of the chassis next to the Cisco logo
- C. on the top front of the chassis next to the serial number
- D. on the bottom front of the chassis next to the serial number
Answer: A
NEW QUESTION # 34
Which three components are hot swappable in a Cisco UCS Blade Server and Chassis? (Choose three.)
- A. Heat sink
- B. Fabric Extender
- C. Power supply
- D. 2x8GB Kit DIMMs
- E. Mezzanine card
- F. SAS Hard Drive
Answer: B,C,F
NEW QUESTION # 35
......
The Cisco 010-151 exam covers a wide range of topics, including data center architecture, Cisco NX-OS software, Cisco Unified Fabric, Cisco ACI, Cisco MDS switches, and Cisco UCS. Additionally, candidates will be tested on their knowledge of network protocols, such as BGP, OSPF, and STP. The Cisco 010-151 exam is an ideal certification for IT professionals who want to demonstrate their understanding of data center networking and improve their career prospects.
Cisco 010-151 (Supporting Cisco Datacenter Networking Devices (DCTECH)) Certification Exam is a specialized certification exam designed for professionals who are interested in validating their knowledge and skills in supporting Cisco data center networking devices. 010-151 exam is one of the many certification exams offered by Cisco that focuses on providing professionals with a deeper understanding of Cisco technologies.
Get 100% Authentic Cisco 010-151 Dumps with Correct Answers: https://www.trainingdumps.com/010-151_exam-valid-dumps.html
New Training Course 010-151 Tutorial Preparation Guide: https://drive.google.com/open?id=1jIwV-DAXo2pXUVdXtQV7cIVSOEDl4Iau
