Updated May-2026 Pass FCP_FWF_AD-7.4 Exam - Real Practice Test Questions [Q63-Q88]

Updated May-2026 Pass FCP_FWF_AD-7.4 Exam - Real Practice Test Questions

Download Free Fortinet FCP_FWF_AD-7.4 Real Exam Questions

NEW QUESTION # 63
Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit C

A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices. Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs. To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance? Response:

• A. Reduce the number of wireless networks being broadcast by the AP
• B. Enable frequency handoff on the AP to band steer clients
• C. Install another AP in the reception area to improve available bandwidth
• D. Increase the transmission power of the AP radios

Answer: B

NEW QUESTION # 64
Which tool is used to deploy FortiAP devices through a cloud platform?
Response:

• A. FortiAP Cloud
• B. FortiPlanner
• C. FortiPresence
• D. FortiGate

Answer: A

NEW QUESTION # 65
Refer to the exhibits.


The exhibits show the AP profile the controller RF analysis output and a diagnostic summary of the AP and neighboring APs The wireless network is used for multiple purposes including corporate access guest access and connecting point-of-sale and loT devices Users connecting to the guest network located in the reception area are reporting stow performance Which configuration change is most likely to improve performance?

• A. install another AP in the reception area to improve available bandwidth.
• B. Enable frequency handoff on the AP to band steer clients
• C. increase the transmission power of the AP radios
• D. Reduce the number of SSlDs being broadcast by the reception AP

Answer: D

NEW QUESTION # 66
For wireless networks configuration, which tools can be used?
Response:

• A. FortiAP Cloud
• B. FortiPlanner
• C. FortiPresence
• D. FortiGate integrated wireless controller

Answer: A,D

NEW QUESTION # 67
Two APs are located in a shop that is required to support forty 2.4 GHz point-of-sale wireless devices. The APs are managed by a centrally hosted FortiGate. A previous wireless network administrator has enabled client load balancing between APs.
However, the clients are not balancing well between the APs, causing overloading on one of the AP radios. Refer to the exhibit, which is part of the configuration of the AP profile that is used for the APs.

The first AP has 35 clients associated with it, the second has five clients associated with it. The detected noise floor of the network is -91dBm. The channel utilization for both 2.4 GHZ interfaces is less than 40%. The clients have a detected signal strength of between -53 and -71 dBm. Which configuration change would improve the distribution of wireless clients between the APs? Response:

• A. Manually configure 2.4GHz interfaces of both APs to separate channels.
• B. Decrease the handoff-rssi option to 20.
• C. Increase the handoff-sta-thresh option to 20.
• D. Set the max-clients option to 20.

Answer: B

NEW QUESTION # 68
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
Response:

• A. DTLS encryption on wireless traffic must be turned off
• B. Wireless network security must be set to open
• C. Two wireless APs must be sending data
• D. SQL services must be running

Answer: D

NEW QUESTION # 69
Which two statements are true about AP profiles?
(Choose two.)
Response:

• A. An AP must be authorized before having a profile applied.
• B. A profile must be applied manually to an AP before it can be managed by FortiGate.
• C. A FortiAP profile must be applied to a FortiAP group.
• D. AP profiles are model specific.

Answer: A,D

NEW QUESTION # 70
When preauthorizing an AP in the GUI, which minimum configuration parameter is required to add an AP?
Response:

• A. The FortiAP Profile and AP name
• B. The AP serial number and FortiAP Profile
• C. The AP serial number, FortiAP Profile, and AP login password
• D. The AP serial number

Answer: B

NEW QUESTION # 71
Which of the following tools cannot act as a standalone wireless controller?
Response:

• A. FortiPlanner
• B. FortiPresence
• C. FortiGate
• D. FortiAP Cloud

Answer: A

NEW QUESTION # 72
What is a common method used to scan for rogue APs?
Response:

• A. Monitoring wireless channels and spectrum.
• B. Checking the uplink speed of all devices.
• C. Analyzing Ethernet traffic for suspicious patterns.
• D. Evaluating the DHCP server logs.

Answer: A

NEW QUESTION # 73
What is the relationship between wireless channels and data transmission?

• A. The more wireless channels, the more power consumption is required
• B. A wireless channel is allocated to transmit data unidirectionally
• C. Data is transmitted over only one wireless channel at a time
• D. The wider the channel the more data it can carry

Answer: D

NEW QUESTION # 74
Which modulation scheme offers extremely high throughput (EHT) in 802.11be technology?
Response:

• A. Binary phase-shift keying
• B. Quadrature amplitude modulation
• C. Direct sequence spread spectrum
• D. Orthogonal frequency division multiplexing

Answer: B

NEW QUESTION # 75
Refer to the exhibit.

What does the red line represent?

• A. A pool of channels for the wireless radio to broadcast the wireless signal.
• B. Practical channel bonding to increase high throughput
• C. The total length of the wireless signal wavelength
• D. The range of channels used to allocate available airtime while transmitting data

Answer: B

NEW QUESTION # 76
What are the benefits of using SSID hiding in a wireless network?
(Select all that apply)
Response:

• A. Preventing casual scanning of the network
• B. Reducing the visibility of the network to unauthorized users
• C. Allowing automatic connection for authorized devices
• D. Enhancing wireless signal strength

Answer: A,B

NEW QUESTION # 77
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
Response:

• A. Static
• B. Broadcast
• C. DHCP
• D. Multicast

Answer: A

NEW QUESTION # 78
Which features can be utilized for improved client distribution and efficient bandwidth usage?
Response:

• A. Advanced bridge mode options
• B. FortiGate guest management
• C. VLAN load-balancing
• D. FortiAP load balancing

Answer: C,D

NEW QUESTION # 79
A FortiAP device is connected directly to a FortiGate interlace. What discovery method will be used to provision the FortiAP device?

• A. FortiAP discovers FortiGate by connecting to FortiLAN Cloud to verify its management license.
• B. FortiAP discovers FortiGate by reviewing the vendor class value.
• C. FortiGate discovers the FortiAP IP address from DHCP option 138.
• D. FortiGate discovers the FortiAP through the received broadcast packets.

Answer: D

NEW QUESTION # 80
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi?
(Choose two.)
Response:

• A. Software security token authentication
• B. Short message service authentication
• C. Hardware security token authentication
• D. Social networks authentication

Answer: B,D

NEW QUESTION # 81
When configuring VLANs on SSIDs, what is the primary benefit?
Response:

• A. Logical segregation of network traffic
• B. Improved load balancing
• C. Simplified guest management
• D. Enhanced wireless signal strength

Answer: A

NEW QUESTION # 82
Which of the following tools are associated with predictive modeling or analytics?
Response:

• A. FortiPresence
• B. FortiPlanner
• C. FortiGate
• D. FortiAP Cloud

Answer: A,B

NEW QUESTION # 83
To achieve centralized management of multiple FortiAP devices, one would most likely use:
Response:

• A. FortiPlanner
• B. FortiPresence analytics
• C. Directly via each FortiAP's web interface
• D. FortiGate integrated wireless controller

Answer: D

NEW QUESTION # 84
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct?
(Choose two.)
Response:

• A. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
• B. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
• C. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
• D. DARRP measurements can be scheduled to occur at specific times.

Answer: B,D

NEW QUESTION # 85
Which of the following options are considered wireless security measures?
Response:

• A. Rogue AP scanning
• B. SSID hiding
• C. Firmware updating
• D. WPA3 encryption

Answer: A,B,D

NEW QUESTION # 86
Advanced bridge mode options on FortiAP devices allow for direct communication between wireless and wired networks.
Response:

• A. False
• B. True

Answer: B

NEW QUESTION # 87
Refer to the exhibit.


User1 is part of the infrastructure department and connects to the ONBOARD wireless network using the credentials uteri. However, the dynamic VLAN assignment is not working Which configuration step must you take to fix this issue?

• A. Add user1 in one of the VLAN names
• B. Disable the DHCP server on ONBOARD to allow VLAN assignment.
• C. Create a new VLAN name infrastructure' with a VLAN ID associated with it
• D. Update user1 RADIUS attributes to include a VLAN ID attribute ID

Answer: D

NEW QUESTION # 88
......

Fortinet FCP_FWF_AD-7.4 Exam Syllabus Topics:

Topic	Details
Topic 1	Wireless diagnostics and analytics: This section of the exam measures skills of security administrators and covers the tools and techniques used to diagnose and analyze wireless issues. It includes gathering information from clients and devices, troubleshooting common wireless problems, and reviewing logs and debug data to apply effective fixes.
Topic 2	Wireless fundamentals and FortiAP management: This section of the exam measures skills of network engineers and covers the foundational understanding of wireless technologies and standards. It includes knowledge of deploying FortiAP devices using the integrated FortiOS wireless controller and configuring them using custom access point profiles.
Topic 3	Wireless network security and access: This section of the exam measures skills of security administrators and covers the design and deployment of secure wireless networks. It includes configuring wireless access controls, implementing VLANs, and using network access control (NAC) to segment and protect the wireless environment.
Topic 4	Wireless monitoring and protection: This section of the exam measures skills of network engineers and covers monitoring and managing wireless infrastructure. It focuses on identifying wireless threats, detecting malicious activities, and ensuring access point performance and stability. It also involves implementing guest services and location-based presence features.

 

FCP_FWF_AD-7.4 Dumps 100 Pass Guarantee With Latest Demo: https://www.trainingdumps.com/FCP_FWF_AD-7.4_exam-valid-dumps.html

Pass Your Exam With 100% Verified FCP_FWF_AD-7.4 Exam Questions: https://drive.google.com/open?id=1zZdoh9Hgpfkwad5fQpz5plhz-AM_f12r